SMC-Kolpino

SMC-Kolpino

About

Customers

Press Center

Corporate Responsibility

June 06, 2017

SMC-Kolpino will supply more than 17 thousand tons of shipbuilding steel to the Far East mill “Zvezda”

“Severstal”, one of the world's leading vertically integrated steel and mining companies, will supply 17 700 tons of primed rolled metal to the Far East Mill “Zvezda”: steel sheets more than 3 meters wide and 12 meters long.

May 30, 2017

SMC-Kolpino started the industrial production of dumpcart boards

The service metal center of “Severstal" in Kolpino (SMC, “Severstal Russian Steel” division) has started the production and delivery of dumpcart boards in the industrial volumes. The first batch of eight products, which will be loaded to the dumping cars for the transportation and unloading of iron ore, has already been sent to the consumer.

February 17, 2017

SMC-Kolpino develops the cooperation with the wind towers producers

SMC-Kolpino (Severstal Russian Steel” Division) will supply more than 2 thousand tons of steel feeds for the construction of wind towers by the end of the 1 quarter of 2017.

Search on severstal.com

Range

From May 2017 to June 2017

Seversal Service Steel Center Kolpino is industrial complex created for heavy plate processing including shot blasting and protective priming line, plasma-beam cutting, edge trimming and plate forming.

Services


	Shot blasting and application of protective primer The automatic preservation line for flat rolled products installed in the facility (PME-Group, Finland) is one of the largest lines in Europe. Its length is 75 m. The properties of the line make it possible to apply a wide range of preservation coats


	Plasma and gas — oxygen cutting The facility’s manufacturing department have four Japanese plasma arc cutting units (Versagraph 6000 DXI, KOIKE). One of the units is equipped with a gas-cutting torch that allows to cut plates up to 210 mm thick. The characteristics of the equipment


	Beveling (welding preparation) The service center is furnished with a wide range of edge cutting equipment, which makes it possible to properly prepare the surface of works for welding. Edges are cut by means of the following equipment: semi-automatic gas-cutting machine CIR-CUT-II


	Press forming The facility’s fabrication yard is equipped with high-tech bending equipment whose purpose is to obtain moulded section and various parts from steel plates: Hydraulic sheet bending press YERMAK CNC AP 3600−160 (Turkey) Size range of processed steel: metal


	Roll – bending 4−roll plate bending machine MH 340 G (Italy) (will be start into operation in December, 2013). Size range of processed steel: metal thickness: up to 40 mm gauge length: 3,100 mm minimum bend diameter: 495 mm maximum bend diameter: 4,500 mm Modern

© 2009 — 2018 Severstal

Developed by Fractalla Design